Chlorine & sulphur free cutting oil for deep hole drlling applications as per annexure attached

Carbide sludge containing minimum 50 cao (on dry basis) . it should be free from grits, stone, lumps

5 french fixed curve quadr [srphc82276005-5 french fixed curve quadripolar electrode catheter with 2-5-2 inter electrode spacing. one matching connecting cable should be provided free of cost for every three catheters. should be dcgi approved.]

7 french quadripolar radio [srphc82276035-7 french quadripolar radio frequency ablation catheter with a 4 mm tip and bidirectional deflection . should be available in small, medium and large curves. should be compatible with all available leading brands of radio frequency generators. one matching connecting cable should be provided free of cost for every three catheters. should be dcgi approved.] , french or 8 french quadr [srphc82276030-7 french or 8 french quadripolar radio frequency ablati

Hq_med_sur_[ph.no.272005] cotton bandage cloth non sterilized. the cloth should be woven in plain weave with well formed selvedge and free from filling, stitching or dressing material defects. it should be bleached to good white as per is.863:1988. width of 100 cm, supply in metres.

Industrial metal cutting gas (lpg), 19 k [industrial metal cutting gas (lpg), 19 kg non - domestic non - exempted (ndne) cylinder, confirming to id 4576:2021 (fourth revision ) note: in firms returnable cylinder 1) supply should be effected in part quantity based on consignee request 2)supplier has to supply cylinders as per requirement of consignee note: condition-empty cylinders of the firm will be returned back after completion of the work ]

Supply of managaed expandable rack type stm-1 adm l-1-1 as per technical specification no tec gr no-gr /tx/sdh/004/04 jan 2011 (tec 86020:2011) with stm-1 aggregate interface 32 e1s & 4 nos of 10/100 base t ethernet port, order wire, power supply unit sub rack installation material & accessories manual & software etc. the equipment should be fully wired for its ultimate capacity.the equipment should be fully compatible/interpretable with existing stm-1 network (tejas-tj1400).

Diffuser for fluorescent light fitting to item no.7 of icf drg. no. sk-7-6-103 col. iii with alterations c to m. note: material for item no.7 should be lexan-940 polycarbonate grains of ge plastic only and shall be free from scratches, air bubbles and holes etc. insignia of the firm may be embossed on the diffuser. however, the firms may quote for latest specification/drawing with amendment if any issued by rdso/icf/rcf.

Howrah division - supply, installation, commissioning and operation of track based rail lubricator(electronic type of 1 km category) along with supply of lubricant for raillubricator as per site requirement with a minimum of 20kg per month perlubricator. complete system should be as per rdso technical specification irs t48 (vers. 5 of latest) for 5 years under the jurisdiction of hwh division ( total -49 nos.)

Carriage of condemned wheelset from visakhapatnam/scor to rail wheel factory, yelahanka, bengaluru, karnataka-560064, by road. loading and unloading by railways at free of cost. note: mandatory documents should be submitted in compliance with bid security condition, power of attorney, iba certification, annexure-xviii. non-submission of necessary documents/annexures in support of the above may result in the rejection of bids. quantity: 1000 mt(approx). distance : 1066 kms(approx).