Trough floor assembly complete for 3 phase memu/dmc coach note:- 1.0 extra channels are to be provided on suitable location of trough floor assembly for lifting/transporation purpose ., as per drawing: em11545 alt b item no. 6 to be supplied as loose in seprate packing, packing instruction: no special packing required. the protruding, threaded portion, gauges and loose items etc. if any are to be protected with suitable covering to prevent it from damage. however transit damage if any sh

Body side stanchion short (length-650mm) for boxnhl wagon (outer hole distance of 118 mm from center). drawing no. : ser s drg. no. : kgp-2870, item no. 1 to 4 are in assembled condition, and item no. 5 in loose condition. material and specification : as per drawing and conforming to rdso s spec. no. wd-01- crf-12 (rev.1) of january 2016.

1. ht hh screw with nut m6x50 to is 1364/part 2 &3/2002, grade 8.8/10.9 for screw and grade 8 for nut with 2 flat washer to is: 2016 and 1 spring washer to is:3063 used for fitment of headlight. item should be supplied in assemble condition. 2. ht hh screw with nut m5x30 to is 1364/part 2 &3/2002, grade 8.8/10.9 for screw and grade 8 for nut with 2 flat washer to is: 2016 & 1 spring washer to is: 3063 used for fitment of cab items. item should be supplied in assemble condition.

Intravascular lithotripsy intuitive catheter with rx system integrated 12 mm double wall balloon of diameters: 2.5, 3.0, 3.5, 4.0 mm and shockwave intravascular lithotripsy generator. connector cable should be supplied by the firm during case [item code no.: s62272 , ai 26-27]

Industrial metal cutting gas (lpg), 19 k [industrial metal cutting gas (lpg), 19 kg non - domestic non - exempted (ndne) cylinder, confirming to id 4576:2021 (fourth revision ) note: in firms returnable cylinder 1) supply should be effected in part quantity based on consignee request 2)supplier has to supply cylinders as per requirement of consignee note: condition-empty cylinders of the firm will be returned back after completion of the work ]

Hyd double pump, for duo machines. equi [hyd double pump, for duo machines. equivalent to part no.: hy-831x38-14-re, part make: plasser/veljan-denison/parker-denison., warranty: up to 18 months from the date of supply, note: - material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. ]

Printing of authority for temporary single line working on double line automatic block system, t/e912 (as per sample for 150 sheets in each book) , each book contains 50 form no.t/e912 and each form 3 copies will be same number.(1x3x50=150 pages 1 book) sample and specification attached as per p.o. attached.

Bifurcation of the existing 11kv dnm colony feeder emanating from 33/11kv lodha indoor ss by using existing idle 11kv capacitor bank breaker and laying of 0.5 km 11kv 3x300 sqmm xlpe ug cable (double run) in sanathnagar section of sanathnagar subdivision in greenlands division and the work will be executed by the construction wing of banjara hills circle

Tooth spacing k-value checking go gauge [tooth spacing k-value checking go gauge for bull gear 72 teeth mating shaft pinion 20 teeth for wap-7 locos to rdso drg. no. skdp-3474 & rdso: mp.m1-129/86. sizes go: 260.958mm/260.992 mm. material: tool steel to is: 3748/90, hardness: 50/55 hrc. c alibration certificate from nabl approved lab to be supplied along with the material.]

Supply of radio communication test set as per attached technical specification,supply of rf coaxial cable double screened - 1 meter with n male to n-male connector,supply of rf coaxial cable double screened- 1 meter with n-male to n- female connector,supply of rf coaxial cable double screened- 1 meter with n-female to n- female connector,supply of bnc male to bnc male cable 2 meter,supply of bnc male to bnc female cable 2 meter,supply of lan cable 2 meter,supply of usb cable 1 meter,supply of rf adapter kit-1 no. inter-series n-type, sma, bnc, tnc,600 ohms balance to unbalance audio convertor with one end bnc male to connect to test and other end to connect the balanced line.,supply of ac power cord or dc adaptor with cord. if rechargeable internal battery will be charged by external battery charger, then battery charger also must be provided,supply of applicable software in cd or dvd or pen drive and hardware tools,sitc and training charges