Compressor delivery hose with both ends

2 in id rubber hose single wire braided

100 pair mdf,20 pair mdf,punching tool,rj-11 socket and surface box,dp box 10 pair with bmf epoxy powder coated ms box,end connections rj45 male at both ends.100 mtrs,end connections rj45 male at both ends.50 mtrs,end connections rj45 male at both ends.30 mtrs,end connections rj45 male at both ends.25 mtrs,end connections rj45 male at both ends.15 mtrs,end connections rj45 male at both ends.5 mtrs,end connections rj45 male at both ends.3 mtrs,end connections rj45 male at one ends and other end rj45 female connection. 1.5 mtrs,rj-45 connector,analog phone

Single wire braided coton covered hydraulic hose , id-3/16 (4.76 mm) , od-33/64 (13.09 mm) to spec sae 100 r5.

Health faucet 1/2 inch with 1.2 meter length (including gun /nozzle length) stainless steel braided hose (flexible), crimped ends with brass union nuts with mounting bracket. the spindle material must be brass.

High pressure hose pipe size 5/16 inch, length15 meters long with connector (both sides end fittings) end fittings with o ring type straight with 27 a/f nut both sides suitable for water jets.

Braided rubber hose pipe id 100x od 110 x l 500 mm with 01 no. worm drive clip, size : 120 mm, as per spec : - is : 444-1987, type- 2, and spec : aisi-304

Medium pressure rubber hose for sander confirming to sae 100 r2 specifications. length = 950 mm, od =19 mm, id = 9.5 mm, both side 3/8 size swivell nut

Main circuit breaker (vcb) with its connector and 05 percent extra flexible reinforced rubber 27-inch-long air hose pipe i/d 5/16 with 3/8 bsp female coupling fitting at both ends as manufacturing spares to clw specification no. clw/es/c-47/i for fitment in wap-7 and wag-9 3 phase locomotives.

13 pin uic coupler, plug assembly consisting of 1.62 meter cable with polyamide hose & uic plug on both ends round type similar to schaltbau make as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev.-2.