Similar Tenders

• Pivot liner( vertical) for wap-1/4 half material phenolic resin bonded fabric laminate having a solid lubricant dispersed throughout the matrix for self lubricating purpose and having a flexunal strength of 950 kg/sq.cm and compression strength 1000 kg/sq.cm. to clw drg. no. 03/4/12/2 alt-4.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · New Delhi Closed 17/09/2024

  View tender →

• Design, manufacture, testing before dispatch delivery of 950 mt gss wire grade 5 size 7,3.15mm bearing isi pqm mark having tensile strength 45 kg per sq. mm conforming to pspcl tender enquiry qq-2363 po p

  Department of Power | State Govt. and UT · PATIALA Closed 02/06/2025

  View tender →

• Steel round of size 135 mm having properties uts 52 kg/mm sq (min) yield strength 36 kgf/mm sq (min

  Department of Defence Production | Ministry of Defence Closed 22/07/2025

  View tender →

• Zig zag(green colour) pvc s mat is having anti skid and high tensile strength virgin of size: width 4 feet and thickness: 4.5mm(approx.) for wap-4 locos. note: one sample piece should be got approved before effecting bulk supply.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Secunderabad Closed 13/12/2024

  View tender →

• Hydraulic pusher 60 ton for cbc draft gear removal arrangement, having operating pressure 250 kg/sq.cm, cylinder bore dia: 125 mm, ram stroke : 90 mm and closing height - 190 mm, pump 3 cc/stroke and maximum pressure 500 kg/sq.cm . one set consist of 04 items as follows : 1) hydraulic pusher cylinder 60 tons - qty - 01 no/set. 2) high pressure hydraulic hand pump - qty - 01 no/set. 3) pusher assembly bracket - qty - 01 no/set. (4) high pressure hydraulic hose - qty - 03 mtr./set.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Chennai Closed 04/06/2024

  View tender →

• Silicon sealant having specification- neutral cure system, clear/red colour, non sag viscocity, 16 to 25 kg/cm2 tensile strength, packing in 300 to 500 gm cartridge, self life 12 months from date of mfg. make anabond 685 or equivalent. ( unit:- gram )

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Jaipur Closed 16/07/2024

  View tender →

• Procurement of silicone elastomer rtv-678 of anabond pvt. ltd. or rtv-1080 of m/s. dow corning or similar with parameters room temperature vulcanizing oxime silicon single component, non-slumping, low odour, low volatile sealant in 310 gms catridge to specification : (i) specific gravity : 1.0-1.10 (ii) tensile strength in kg/sq.cm : 15-25 (iii) dielectric strength : greater than 18 (iv) service temperature : 50 to 250 degree c. (v) colour : white. (vi) skin forming time surface cure : 15-25 m

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 04/09/2025

  View tender →

• Silicone elastomer rtv-678 of anabond pvt. ltd.or rtv-1080 of m/s. dow corning or similar with parameters room temperature vulcanizing oxime silicon single component, non-slumping, low odour, low volatile sealant in 310 gms catridge to specification: (i) specific gravity:1.0-1.10 (ii) tensile strength in kg/sq.cm : 15-25 (iii) dielectric strength : greater than 18 (iv) service temperture: 50 to 250 degree c. (v) colour: white. (vi) skin forming time surface cure: 15-25 minutes. (tenderer shoul

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Bhubaneswar Closed 18/11/2024

  View tender →

• Hot dipped non-galvanised mild steel long link for lashing of size 20mm /- 5 percent , nominal dia chain & 60mm of inner dia and height of 30mm having approx. 12-13 kg weight per meter with high tensile strength of at least 17 tons with test certificate from approved agency.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Bilaspur Closed 22/08/2024

  View tender →

• Hydraulic pusher 60 ton for cbc draft gear removal arrangement, having operating pressure 250 kg/sq. cm , cylinder bore dia :125 mm, ram stroke : 90 mm and closing height - 190 mm, pump 3 cc/stroke and maximum pressure 500 kg/sq.cm . one set consist of 04 items as follows:- (1) hydraulic pusher cylinder 60 tons - 1 no/set, (2) high pressure hydraulic hand pump percent u2013 01 no/set, (3) pusher assembly bracket - 01 no/set, (4) high pressure hydraulic hose - 3 mtr./or similar arrangement

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 18/01/2024

  View tender →