Traction motor lug wear plate nwr drg.no. dl/be-10/abr alt2.

Adaptor for sanding arrangement of wag-9 locos as per drg. no. ngp/trs/4/25.064, rev. 1 or latest and material specification : ms to is 2062/ 2011 gr. e-250a. note: one sample should be got approved before effecting bulk supply.

Burnisher, fine contact, blk, pack of 3 [burnisher, fine contact, blk, pack of 3 as per part no- ob-1/3. make/brand- jonardtools or similar. note:- one sample should be got approved before the bulk supply.]

Four pole change over switch disconnector mcb with centre position off(i-o-ii), rated current 40a, operational voltage 415v. makes: legrand / havells / c & s / schneider / abb or its equivalent. note: one sample should be got approved before effecting bulk supply.

Insulating rod assembly for positive & negative support insulator for hitachi tm type hs-15250a to drg.no. skel-4439, alt-1, ref: 1 to 4. note: one sample set should be got approved before effecting bulk supply. (as per uvam id:2101199).

Set of nipples required for pneumatic pipelines consisting of two items as follows. 1) 1/2 x 1/2 nipples both sides parallel threads as per drg. no. b/trs/pn.eqpt/3/56 or latest. qty/set. = 03nos. 2) 3/4 x 1/2 reducing nipple taper & parallel thread(nom dimension in mm on od: 27 x 21r & nom diameter in mm on id: 20.15 as per drg. no. b/trs/pn.eqpt/3/18, alt a or latest if any. qty/set. = 01no. note: ten sample sets should be got approved before effecting bulk supply.

Epdm rubber cable cleat suitable for traction motor cable of 300 sqmm cable with 4 nos. entry along with mounting arrangement on wag-7 type loco boggie as per els/bia drg. no. trs/bia/d-01/e3/02-11.

Aluminized kevlar heat resistant safety gloves up to 600 degree c as per enclosed technical specification at annexure-i. make: ufo or its equivalent in jupiter industries/safetyware/cuwiny/terry or its equivalent. note:- 1) firm must mentioned specific make of the offered material while participating in the tender, otherwise such offers are liable for rejection. 2) two sample pairs should be got approved before affecting bulk supply.

Set of two different dowel pins as follows. 1) size : 3 x 35mm as per is 2507, material spring steel. qty/set. = 02 nos. 2) size : 5 x 35mm as per is 2507, material spring steel. qty/set. = 01 no. note: one sample set should be got approved before effecting bulk supply.

Retroreflective sticker radium horizontal band colour red t-6000 series high intensity micro prismatic (hip) width: 01 feet, thickness 0.24 mm t6508 red of make avery dennison/kiwalite /3m//dm reflective or equivalent. note: 1.one sample should be got approved before bulk supply.2. material is required in rolls of standard length i.e. 50 feets or 100 feets.