Duplex check valve with 1.5 kg/cm2 pressure setting.

Sample cooler for steam, coil tube side working pressure: 150 kg/cm2, hydro test pressure: 195 kg/cm

Calibration services - pressure gauge, general or baumer or wika as per sor sl no1 schedule of rates under section vii of atc as per attached atc document as per attached atc document as per attached atc document,calibration services - temperature gauge, general or baumer or wika, capillary tube sensor 0 to 100 deg c as per sor sl no2 schedule of rates under section vii of atc as per attached atc document as per attached atc document as per attached atc do..,calibration services - temperature gauge, general or baumer or wika, capillary tube sensor 50 to 200 deg c as per sor sl no3 schedule of rates under section vii of atc as per attached atc document as per attached atc document as per attached atc d..,calibration services - pressure gauge, general or baumer or wika 0 to 40 kg per cm2 as per sor sl no 4 schedule of rates under section vii of atc as per attached atc document as per attached atc document as per attached atc document,calibration services - pressure gauge, general or baumer or wika 0

Master pressure gauge with dial range 0-16 kg/cm2, dial size: 8 , least count:0.05 kgs/cm2, lower mount connection. accuracy: +/-0.25 percent of fsd accuracy. accepted make:midlands or similar . note:nabl certificate required during supplies

Isi marked single stage lpg regulator kit consisting of regulator with connector & pressure guage (0-2.5 kg/cm2) conforming to spec is: 6901-2009 amendment no.1.

Refilling of zero air gas cylinder (iolar gr.1 zero air gas purity-99.999 percent ) in 47 liter water capacity cylinder consisting of 7 meter cube gas at pressure of 138 kg/cm2.

Air receiver tank, as per is: 7938 -1976 /latest. technical specifications: capacity: 500 liters , material of construction: conforming to is2062/ ss-304/is-2002, code of manufacture: is-2825/ asme sec viii div, shape type : vertical,1/2 inch bsp outlet for pressure gauge, working pressure:10 kg/cm2 , maximum test pressure: 16 kg/cm2 , inlet & outlet connection: 2 inch or 1 1/2 inch flange connection, vessel bottom height from ground: min 300 mm, out let connection 1 inch or 1 1/2 inch for p

Air receiver tank, as per is: 7938 - 1976/latest. technical specifications: capacity: 1000 liters , material of construction: conforming to is2062/ ss-304/is-2002, code of manufacture: is-2825/ asme sec viii div, shape type : vertical, 1/2 inch bsp outlet for pressure gauge, working pressure:10 kg/cm2 , maximum test pressure: 16 kg/cm2 , inlet & outlet connection: 2 inch or 1 1/2 inch flange connection, vessel bottom height from ground: min 300 mm, outlet connection 1 inch or 1 1/2 inch for p

Pneumatic tool hose rubber (having id-12.5 mm and od-21.5 mm maxm.) two layer rayon braided conforming to specifcation is-446 type-iii minimum bursting pressure 56 kg/cm2, acceptable make: plasser, dunlop, indomaksson, pix, polyhose only.

Polytetra methylene terephthalate material (ptmt) s.s. 304 grade spring loaded lift cock15 mm female thread with following specifications, water pressure up to 5 kg/cm2, dimension of lift is length-82 mm, width 42 mm, colour- lvory white/ grey.