Tender Details
About Tender
๐ Procurement Opportunity: Pneumatic Rubber Hose ๐ ๏ธ The Ministry Of Railways, A Central Government Ministry/Department, Is Seeking Bids For The Supply Of High Quality Pneumatic Rubber Hoses With Specific Technical Specifications. ๐ ๏ธ ๐ Product Specifications: Outer Diameter (Od): 21mm Inner Diameter (Id): 12.5mm Length: 600mm End Fittings: Swivel Nut 1/2, Flat Washer, Male And Female Adapters 1/2 With Flat Seating, Nylon Washer Material Conforming To Sae 100 R1 ๐ Bid Submission Deadline: May 15, 2024, 10:30 Am Special Note: Only Original Equipment Manufacturer (Oem) Hoses And End Fittings Will Be Accepted. Interested Suppliers Should Submit Detailed Bids, Including Compliance With The Specified Standards And Quality Assurance Processes. Keywords: Pneumatic Rubber Hose, Air Pressure, Od 21 Mm, Id 12.5 Mm, Length 600 Mm, Swivel Nut, Flat Washer, Adapters, Sae 100 R1, Ministry Of Railways, Central Govt. Procurement, Tender| Particulars | Details |
|---|---|
| Title |
Pneumatic Rubber Hose To Withstand Air Pressure 10 Kg/Sq.Cm, Od 21 Mm, Id 12.5 Mm And Length 600 Mm With Both Ends Swivel Nut 1/2 And Flat Washer And Extra Male And Female Adaptor 1/2 Flat Seating With Nylon Washer To Suit At The End Of The Hose Confirming To Sae 100 R1. Special Note: Hoses And End Fittings From The Same Oem Only Accepted.
|
| Description |
For Complete Deion And Other Details, Please Refer To Tender
|
| Organisation | Ministry of Railways | Central Govt. Ministry/Department |
| Tender Id | 106326800 |
|
Reference Number |
21240914 |
| Tender Fee | 0 |
| EMD | 0 |
| Tender Value | |
| Place | Chennai |
| Link | https://www.ireps.gov.in/ireps/supply/pdfdocs/052024/106326800/viewNitPdf_4548571.pdf |
| Start Date | April 24, 2024 16:57 |
| End Date |
15/05/2024 ( Expired 340 days ago ) Search Similar tenders? |
|
Join for More Relevant Opportunities |
Similar Tenders
Overhauling kit for governor booster pump motor consisting of the following 07 items: 1) oil seal cr 5068 - 01 no. 2) spring steel finger spring washer of id: 10.4mm, od: 29.9mm, thickness: 0.51mm - 01 no. 3) m.s flat washers of id: 20.76mm, od: 29.9mm, thickness: 0.44mm - 01 no. 4) m.s motor fixing studs of length: 137.44mm, dia: 4.25mm, thread length: 38mm - 01 no. 5) 9/16 length, 1/2 width male brass adopter 01 no. 6) carbon brush=04 nos.7) brush holder:02 nos.
For complete deion and other details, please refer to tender
Read moreHose assembly 1/2 inch id x 20 1/2 inch long with 1/2 inch npt male end fittings duly crimped at both ends to emd pt.no.40081684.to specification sae 100 r5 and to dlw pt. no. 17320483. emd drg.pt.no.40081684 alt.aa. or latest (if available)
For complete deion and other details, please refer to tender
Read moreOverhauling kit for governor booster pump motor consisting of the following 07 items: 1) oil seal cr 5068 - 01 no. 2) spring steel finger spring washer of id: 10.4mm, od: 29.9mm, thickness: 0.51mm - 01 no. 3) m.s flat washers of id: 20.76mm, od: 29.9mm, thickness: 0.44mm - 01 no. 4) m.s motor fixing studs of length: 137.44mm, dia: 4.25mm, thread length: 38mm - 01 no. 5) 9/16 length, 1/2 width male brass adopter 01 no. 6) carbon brush=04 nos.7) brush holder:02 nos.
For complete deion and other details, please refer to tender
Read moreHydraulic hose pipe set 15 meter, suitable for avlock/avdel hydraulic power pack and tool, hose set consisting of 2 nos. 15 meter high pressure hydraulic hose i.d. 1/4 inch, working presure 10,000 psi with one end male qrc and another end female qrc fitting. along with 15 meter 2 core wire with one end male electric plug and another end female electric plug. hydraulic hose set covered with nylon protective sleeve as per attached annexure-a
For complete deion and other details, please refer to tender
Read moreSupply of hyd. pin puller set complete for extracting pin, hex wheel, bearing hub of tamping units consisting of following items. (1) adaptor male/femele- 01 no. (2) rectangular tube-01 no. (3) pressure screw/adjusting nut-01 no. (4) flexible hyd.hose with end connecting female 3/8 bsp-02 nos. (5) power cylinder -01 no. (6) 1/2 ntp tap-01 no (7) hyd. hand pump unit(400 bar) -01 no. (8) hyd. puller the wheel puller attachment-01 no. make: plasser make, shanti machinery own make or equivalent.
For complete deion and other details, please refer to tender
Read moreSet of 06 items hose flexible consisting of (1) hose flexible id7/8 inch - 33-inch-long working pressure 800 psi, sae 100r-r 5 r one side 1-inch male fitting & other end 1-5/16 inch-12-inch female end fitting with swivel fitting -10 nos. (2) hose flexible id7/8 inch - 60-inch-long one side male fitting and other side female end fitting -10 nos. (3) hose flexible id7/8 inch - 60-inch-long both side female end fitting - 10 nos. (4) hose flexible 1/2-inch, long-50 inch both side end female fittin
For complete deion and other details, please refer to tender
Read moreHp flexible hose pipe assembly od=17.5 mm, id=08 mm. length 730 mm, both end 3/8 bsp swivel nut plain seated in side wire braided, rubber pipe should be suitable for 20 kg/cm2 working pressure type sae-100 r.1.
For complete deion and other details, please refer to tender
Read moreMaterial for loco washing point (1) high-pressure double steel wire braided sae 2 hose 3/8 x 10 meters long with end fitting suitable for 3/8 bspf male adaptor, qty-1 no (2) 3/8 bspf hex. male adaptor suitable for 3/4 valve, qty-1 no.
For complete deion and other details, please refer to tender
Read moreSet of hose assembly with end fittings [set of hose assembly with end fittings consisting 1) hose r1- 1 x 6 feet (1800 mm) x 1 bsp flat st/st, qty. 10 nos., 2) hose r1- 1 x 4 feet (1200 mm) x 1 bsp flat st/st, qty. 45 nos, 3) hose r1- 1/2 x 2.5 feet (750 mm) x 1/2 flat st/st, qty. 40 nos., and 4) hose r1- 1/2 x 3 feet (900 mm) x 1/2 flat st/st, qty. 20 nos. make : parker markwel / gates corp. / eaton / manuli]
For complete deion and other details, please refer to tender
Read moreSet of hose required for hydraulic icf roller bearing extracting machine (m/c model sepl-130) 1) hydraulic hose with end fittings for hydraulic nut 1/4 inch bspfsn both ends x 3 mtr length x w.p.1000 kg/sq.cm (lh side) to part no. sepl/hh/hn/lhs/130/130 1/4 inch bsp--- qty 01 no. 2) hydraulic hose with end fittings for hydraulic nut 1/4 inch bspfsn both ends x 3 mtr length x w.p.1000 kg/sq.cm (rh side) to part no.sepl/hh/hn/rhs/130/130 1/4 inch bsp---qty 01 no. accepted make/brand:pol yhose/ h
For complete deion and other details, please refer to tender
Read more
Click
Here to Download Dockets
of your Industry type
of your Industry type