1)10 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 1.18mt approx., number of plates: 10 nos. quantity.tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 11.78 mt 2)16 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 1.88 mt approx., number of plates: 16 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 30.14 mt 3)20 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 2.36mt approx., number of plates: 15 no. quantity.tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 35.33 mt 4)25 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 withsupplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 2.94mt approx., number of plates: 14 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 41.21 mt 5)32 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 3.77 mt approx., number of plates: 10 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension qty: 37.68 mt 6)36 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 4.24mt approx., number of plates: 4 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 16.96 mt 7)40 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b.. wt. of one plate - 4.71mt approx., number of plates: 20 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 94.2 mt 8)45 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 5.3mt approx., number of plates: 8 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 42.39 mt 9)50 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 5.89 mt approx., number of plates: 4 no. quantity. tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 23.55 mt 10)56 tk x 2500 (w) x 6000 (l) mm - carbon steel plate of astm a516 gr-70 as per bhel purchase specification aa10403 with supplementary requirement of charpy v-notch impact test on longitudinal, transverse specimen and bend test (longitudinal direction) as per specification astm a20/ a20m. all plates shall be ultrasonically tested and accepted as per astm a578 level-b. wt. of one plate - 6.59mt approx., number of plates: 12 no. quantity . tolerance is 10 percent . negative tolerance in quantity (i.e. weight) is not allowed and no negative tolerance is allowed in any dimension. qty: 79.13 mt

1)08 nos. of 240tk x 2500 (w) x 5000 (l) carbon steel plates to astm a537 class-2 as per bhel specification bp10499 with following supplementray requirements : 1) charpy v-notch impact tests on longitudinal and transverse specimen at temperature as per spec bp10499 rev.00 and at 20 degree celsius (2) ultrasonic examination as per bp10499(rev.00) (3) bend test (longitudinal direction) as per spec bp10499 rev.00. qty: 188.4 mt 2)08 nos. 160 tk x2500 (w) x5000 (l) carbon steel plates to astm a537 class-2 as per bhel specification bp10499 with following supplementray requirements : 1) charpy v-notch impact tests on longitudinal and transverse specimen at temperature as per spec bp10499 rev.00 and at 20 degree celsius (2) ultrasonic examination as per bp10499 (rev.00) (3) bend test (longitudinal direction) as per spec bp10499 rev.00. qty: 125.6 mt