(1) set of two teflon washer consisting of (i) teflon washer/gasket size od- 38.0mm, id- 28.0 mm, thickness-3mm (ii) teflon washer/gasket size od- 34.0mm, id- 25.0 mm, thickness-3mm qty -600 set. (2) teflon gasket, size -od 36.50 mm, id-26.50 mm, thickness -5.00 mm

Copper washer od=14.2mm id=5.8mm thickness=02 mm

Ptef gasket for 1 1/4 inch check valve type 86r, od -38 mm plus 0.1, id - 09 mm, thickness 4.5 mm

Nylon washer, od: 19 mm, id: 12 mm, thickness: 3 mm

Set of o-rings .set consists of 1. 1/2 inch female qrc o- ring, material-nbr, size : od-16 mm, id-12 mm, thickness-2 mm, qty-150 nos 2. 1/2 inch female qrc flat washer, material-nbr, size : od-20 mm, id-10 mm, thickness-3 mm, qty- 150 nos 3 .1/2 inch feed coupler flat washer ,material-nbr, size : od-22 mm, id-9 mm, thickness-3 mm, qty- 150 nos 4. kirloskar compressor 500 cfm diaphragm. material -neoprene ,maximum pressure -12 kg/cm2, size : bottom od-50 mm ,bottom id-48 mm, bottom

M.s. flat washer id-28 mm, od-50mm, thickness -02mm, as per is-2016/67

Set of consumables consisting of followi [set of consumables consisting of following materials: 1. bolt hex head: m12 ? 1.75 ? 50 mm, grade 8.8, qty/set-01 no, 2. nut: m12?1.75 mm, qty/set-01 no, 3. flat washer: 12mm. id-13 mm od-20mm thickness:2mm, qty/set - 01 no, 4. spring lock washer:12 mm,id:12.2-12.6mm,od:21.1mm,thickness:2.5mm, qty/set-01 no. make:- tvs/unbraco/lps/dfl only. ]

Set of o ring gauges, set consisting of two items as detailed below: (1) base o ring for top grip gauges (both side half round face) size: od-8mm, id-2mm, thickness- 2.5mm as per dls drawing no.dls/vskp/2025/17, qty- 12 nos. (2) base o ring for midland gauges (both side flat face) size: od-7mm, id-3mm, thickness- 3mm as per dls drawing no.dls/vskp/2025/18, qty- 12 nos. material: nbr (nitrite butadiene rubber)

Schedule. 1: disc springs of size od 45 x id 22.4 x 2.5 mm thick material en42j spring steel material,schedule. 2: needle bearing nk 50/35 (id: 50/od: 62 x thickness: 35) make ntn / ina

Duct gasket for sctmb of size od : 379mm, id : 319mm, 8 slots of size dia : 10 mm x 30 mm long on 355mm p.c.d. equidistance thickness 5mm.