Air flow relay complete (qvsl/qvrh/qvmtapplication)as per clw specification no.clw/es/r-34,alt-c (switzer/chennai type gm-021-00-d4c-5

Air flow relay for qvmt as per switzer new model no. gm-021-00-d4c-5 or equivalent eversure make to firm s drg no. eee/afr/05 (rev-1) duly appd by rdso/lko conformig to clw spcn no clw/es/r-34/c.

Set of copper busbars for 7775 kva trans [set of copper busbars for 7775 kva transformer, one set consists of following 02 items (1) busbar copper type 70 as per spec clw/es/3/0412 alt-h or fig 39 of spec clw/es/3/0118 alt-m, qty- 02 nos. (2) busbar copper type 71 as per spec clw/es/3/0412 alt-h or or fig 40 of spec clw/es/3/0118 alt-m, qty- 02 nos. (item reserved for clw approved sources only)]

Set of field weakening resistor (rs [set of field weakening resistor (rs) 04 steps for wap-4 locomotives, set consists of two trays (one loco set) as per clw. spec. no. clw/es/r-39/alt-d. ]

Ni-cd battery set for 3-phase loco to clw spec. no. clw/es/3/0030 alt-e. each set consists of 26 blocks of 03 cells each. (note :- latest alt as on the date of invitation of tender will be applicable).

Set of oil tight push button dia 30.50 mm, typet, 600v ac/dc 10 amp actuator, standard flush button and contact block confirming to clw spec. no clw/es/s-8/m and as per bch cat no. given in the enclosed annexure. set consists 09 item and 32 nos.

13 pin uic coupler plug assembly consists of 1.3 mtrs cable and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev. 2. note- uic plug as per clw drawing no. clw/es/3/sk-4/0047/e similar to schaltbau part no. uic st13peod2 and polyamide conduit as per rdso specification rdso/pe/spec/ ac- 0138-2009 rev-2 or latest. item to be procured from clw approved sources.

Set of spares for hrc fuse unit 35 amps, to use on 25 kv ac elec. locos. each set consists of the following as per the clw specn no. clw/es/f8 alt e or with latest alteration and confirming to scr drawing no.a4/el/conv/2677. 1) fuse base 1 no. 2) fuse link 1 no. 3) fuse carrier 2 nos. 4) gauge piece 1 no. 5) collar ring 1 no.

13 pin uic coupler plug assembly with contact pin consists of i .3 meters cables and plyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 reva. note ulc plug as per clw drawing no. clw/es/3/sk- 4/0047/e similar to schatbau part no. ulc st 13 p eo d2 and conduit as eer rdso specification rdso/pe/spec/ac-0138-2009 reva or latest.

Set of blocking diodes illumination test (position no. 123) & its accessories as per clw specn.no. clw/es/3/0055, alt-h, one set consists of 04 items aggregating to 17 pieces as follows: (1) diode block 1.5a, 1600v, type diblo-5, dsi30-16a as per abb document no. hbtb585480 r0001, qty:01 no. (2) connector socket 14 poles, 6a, 240v, ac, as per abb document no. hbt415175p0001, qty:01 no. (3) contact as per abb document no. hbt415176 p0001, qty:14 nos. (4) wire clip as per abb document no. hbt415