Emery bob stick grade 320,emery bob stick grade 150,emery bob stick, no. 1 by 0,emery bob stick grade 0 by 0,emery cloth -grade-100,emery cloth no.120

Emery paper sheet (fine) water proof grit no. 400 or equv. as per is: 715 make: - grindwell norton/ car,emery paper coated abrasive with drill or plain weave cloth backing grit no 40 (rough or coarse) as,emery cloth in 50 mtr roll with drill waved cloth backing,emery cloth in 50 mtr roll with drill waved cloth backing as per is: 715, grit no. 280 to 320(extra f

Calcium hypchloride 65 precent to 70 precent,screw 50 mm,wire nails 20mm and 18 no,cloth malmal 36 feet width,screw 25 mm

Waterproof plywood 8x4 feet x 19mm thick,waterproof plywood 8x4 feet x 25mm thick,three-fourths inch wood screws,1 inch wood screws,mica sheet 8x4 feet and half white colour,mica sheet 8x4 feet and teak wood colour,zero degree hinges,4 inches ss handle,three-fourths inch head less nails,1 inch head less nails,1 inch nail,1 half inch x one-fourth inch teak wood beading 7 feet height,1 half inch wall mounting screw with wood rawal plug,fevical or sh,teak wood finish edge tape 19mm,half white finish edge tape 19mm,probond fevicol,2 inch cupboard lock,4 inches ss tower bolt,4 inches ss door hinges,vinyal flooring sheet - wood pattern,stainless steel 304 mosquito wire mesh, 15 mesh, 0.4mm hole, 1mm thick

Steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,steel countersunk head wire nails conforming to is 723,flat brushes for paints and varnishes for heavy duty (v2) conforming to is 384 (part 1),flat brushes for paints and varnishes for heavy duty (v2) conforming to is 384 (part 1),flat brushes for paints and varnishes for heavy duty (v2) conforming to is 384 (part 1)

Emery belts_paper

Screencloth, wiremesh, 1650x1435mm, is: 2405,sieve, cloth, wire, is2405pi-80, dia 8.0mm,sieve, wirecloth, 1720x1438mm, is: 2405pi-80,sieve, cloth, wire, is: 2405pi-80, aper12.5mm

(ami no. 23.t016/2026-27) 4.5mm cannulated screws titanium with guide wire (as per attached per specification)

4mm cannulated screws titanium, half thread, 20 mm to 80 mm, interchangeable sizes, with guide wire - specification (4mm)

Mri compatible ss pelvic reconstruction plate 3.5 curved-(a) 5hole l-20mm 5 cortex screws, (b) 7hole l-22mm 7 cortex screws,(c) 9hole l-24mm 9 cotex screws, (d) 11hole l-26mm 11 cortex screws, (e) 13hole l-28mm 13 cotex screws, (f) 15hole l-30mm 15 cotex screws, (g) 18hole l-32mm 18 cortex screws.