Stainless steel plate size 2500 x 1250 x 8 mm thick to as per irs m-44/97

S1 ms shuttering plate 1 point 20 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s2 ms shuttering plate 1 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s3 ms shuttering plate 1 mtr x 0 point 60 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s4 ms shuttering plate 1 mtr x 0 point 50 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s5 ms shuttering plate 1 mtr x 0 point 30 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s6 shuttering nut and bolt of size m12 x 50mm comma m12 x 60mm of good quality and branded,s7 round ms pipe 50mm dia x 6 mtr long x 3 point 5 mm thickness of good quality and branded,s8 round ms pipe 50mm dia

Ms shuttering plate of size 1 mtr x 1 pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6 mm having properly welded uniform finish approx weight not less than 69 pt 97 kgs,ms shuttering plate size 1mtr x 1 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50 x50 x6mm having properly welded uniform finish appx weight not less than 51 pt 70 kgs,ms shuttering plate size 1 mtr x zero pt 60 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x 6mm having properly welded uniform finish appx weight not less than 31 pt 92 kgs,ms shuttering plate size 1 mtr x zero pt 5 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50 x 6mm having properly welded uniform finish,ms shuttering plate size 1 mtr x zero pt 3 mtr made with 3 pt 15 mm thick ms sheet with angle iron of size 50x50x 6mm welded uniform finish appx weight not less than 20 pt 46 kgs,ms shuttering plate size 1 mtr x zero pt 2 mtr made with 3 pt 15 mm thick ms sheet with angle iron size 50x50x

Mild steel sheet, hot rolled, size: 2500 mm x 1250 mm x 1.6 mm, as per is 1079-1994,mild steel sheet 4 mm thick. size 1219 mm x 2438mm, (4 feet x 8 feet) design. fe 410, is: 1079-1988(an,mild steel plate cold rolled and annealed design 15 c4, specn-is: 1570 (part i) 1970 size: 8 feet x,mild steel plate cold rolled and annealed size, length 2400 mm x 1200 mm x12 mm thick design 15 c4 an,mild steel plate cold rolled and annealed design 15c4 specn. is 1570 (part ii) 1979 size 1200 mm x 9,mild steel plate cold rolled and annealed design 15c4 specn. is: 1570 (part i) 1970, size 1000 mm x 9,mild steel plate cold rolled and annealed design 15 c4 specn. is 1570 (part ii) 1979, size 1000 mm x 9,mild steel plate cold rolled and annealed design 15c4 specn. is 1570 (part i) 1970 size 1000 mm x 90,stainless steel sheet, size: 8 feet x 4 feet x 2 mm, grade: ss 304.

Verified ceramic bone china crockery set with gold rim,gold pvd coated cutlery d spoon,gold pvd coated cutlery d fork,gold pvd coated cutlery table knife,gold pvd coated cutlery dessert fork,gold pvd coated cutlery small spoon,stainless steel gold pvd coated cutlery set,glass tumbler with ornate gold band and circular design,crystal glassware whisky glass,hi luxe german designed crystal whisky glass,smokey finish cocktail whisky glass,tall water glass with enamelled gold band rim,dublin style water glass with gold rimmed top,printed lion medallion designed whisky glass,amber-tinted glass coupe ice cream dessert cup set,premium quality clear glass bowl set with plate,tea cup and saucer set with navy blue and gold trim,glass jar set with wooden lids and wooden serving tray,exclusive polyresin bath decor bathroom accessory set,soho style polyresin bathroom accessory set,stainless steel gold pvd coated pastry wave tong,stainless steel gold pvd coated multi-purpose tong,stainless steel gold pvd coated li

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),stainless steel sinks for domestic purposes (v3) as per is 13983,plywood for general purposes marked to is 303 (v3),plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,wire mesh tainless steel of size 1.2 x 15 mtr with 0.56mm x 1.18mm appartus,peg of six,aluminium sliding bolt 300mm isi mark,pre-laminated particle board one side teak melamine finish and other side white melamine finish 8x4x18mm thick,cushion cover made out of superior quality tapestry cloth size 533x560x100 mm,wooden beading teak wood 25 mmx 25 mm,door seal with aluminium frame 3 feet long,sink coupling,pvc bullets 50mm con

Steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete above plinth level thermo mechanically treated bars of grade fe500d or more.,half brick masonry with common burnt clay fps non modular bricks of class designation above plinth level up to floor v level cement mortar 1 is to 4 where 1 cement and 4 coarse sand,stainless steel cramps,two track two panels sliding with aluminium channel for roller track wool pile nylon rollers with ss 304 using r4 series with frame,providing and fixing 19 mm thick both side balancing lamination factory pressed bwp grade marine ply,providing and fixing 2mm thick 16 to 19mm wide pvc edge binding tape of approved quality for cupboard,double charge vitrified tile polished finish of size of tile 600 x 600 mm,finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade,providing and applying white cement based putty of average thickness 1 mm,wiring for light point fa

Copper alloy taps/stop valves (v2) conforming to is 8931,plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763,copper alloy taps/stop valves (v2) conforming to is 8931,copper alloy taps/stop valves (v2) conforming to is 8931,galvanized wire cloth 0.56mm dia of wire average width of aparture 1.0mm,looking mirror with aluminium frame 400x500mm,wash basin size 630mm x450mm,stainless steel kitchen sink single bowl single drain 36inchx18inchx8inch,glass sheet 3mm thick size 4ftx4ft,ss tower bolt 150mm,pvc connection 15 mm x 24inch long,aluminium sliding door bolt 300 mm,stainless steel plate rack 30inch x 36inchx9inch,gi tank nipple 15mm isi makred,gi tank niple 20mm isi makred,gi plug 20mm isi makred,gi nipple 15x50mm isi makred,gi nipple 15x75mm isi makred,gi nipple 15x150mm isi marked,gi nipple 20x50mm isi makred,gi nipple 20x75mm isi makred,gi nipple 20x150mm isi makred

Rolls absorbent cotton dental assorted sizes in box of 500,bur tungsten carbide for straight hand piece 7 mm,haemostatic sponge gelatin 80 mm long 50 mm broad 10 mm thick,base plate lower box of 12,base plate upper box of 12,material impression alginate pkt in 300 to 500 gms,gp solvent bott of 10 to 20 ml,paper glass perforated fine 7 point 6 cm wide roll of 25 mtr sand paper,self cure scrylic powder pink shade bott with rapid repair liquid,teeth acrylic cross linked of 28 complete,spray anaesthetic surface bott of 100 ml,matrix retainer ss ivory pattern band for molars and premolars,plugger nerve canal fig 2 of 6 assorted,k files stainless steel size no 8 length 25 mm of 6,endodonic files system for re treatment,gauze absorbent folded 2 point 5 cm x 100 mtr,plaster of paris special dental grade 1

Sitc of prefabricated epg puff wall panel and ceiling panel 50mm thickness and 30 mm for 01 nos of operating area and connecting roomspainting of wall and ceiling with anti microbial paint,sitc of unidirectional laminar flow air system with 6 h14 minipleat hepa filters,sitc of seamless flooring with perfectly curved resistance to mechanical stress and dynamic load and having electro static discharge esd anticonductive protection characteristics 2 mm thick washable,sitc of recess led luminaire dimension l x w 590 to 600 x 590 to 600 mm fitting made of powder coated finish with fully covered ip 65 with gasketting,s i t of surgeon control panel membrance mounted flush in the theatre wall as per enclosed tender technical specifications.,double arm movable pendant for anaesthetist as per tender specifications fully complies and meetas with htm 02-01,single arm movable pendant for surgeon as per tender specifications fully complies and meetas with htm 02-01 .,sitc of twin plate led x ray viewing screen designed top