Open tenders like this

• Cutting blow pipe of nozzle mixing technology, mixing of gases in three seat nozzles only. ss filter at inlet (oxygen), angle head forged from brass rods for much stronger and longer life. ss tube for oxygen and fuel gas, metallic knobs, better grip, lower fatigue for operator, cutting capacity 300 mm, length of torch 450mm, angle head 90 degree with 1 no. 1/16 pnme lpg cutting nozzle & 1 no. 3/32 pnme lpg cutting nozzle make esab/ victor/smith or its equivalent.

  For complete description and other details, please refer to tender document.

  Ministry of Railways Closes 13/11/2026

  View tender →

• High pressure washer for cleaning of solar panels equivalent to bosch model no.advanced aquatak 160 with the following specifications 1.supply: 230-240v, 50hz single phase. 2.rated power: 2600 watts [+/-]50watts. 3.max. pressure: 160 bar. 4.max. flow rate: 10litres/minute or 570lph. 5.max. flow temp: 40 degrees centigrade. 6.self priming capability: 0.5m 7.motor type: induction motor. 8.pump type: 4 cylinder. 9.pump material: all metal. 10.min. cable length: 5m 11.handle type: telescopic. 12.m

  For complete description and other details, please refer to tender document.

  Ministry of Railways Closes 11/11/2026

  View tender →

• Insert dnga 150608-m2 ib20hc h aving insert life of 60 minute s for job having upto hrc 30, suitabl

  Department of Defence Production | Ministry of Defence Closed 16/01/2025

  View tender →

• Epoxy compound for general purpose.ts as undertype =two component consisting resin & hardner.mixing ratio =resin & hardner 1:1 vol.viscosity of resin =putty consistency. viscosity of hardner =putty consistency. mixing time =2-3 minutes.physical state of mixed mass =fine smooth putty consistency. curing time =30/40 minutes at 30 degree c. hardness =70-80 shores d .water absorption =28 mgs.(after 24 hrs water immersion) dielectric strength =13-14 kv/mm. compressive strength =450-500 kg/cm sq. t

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Mumbai CST Closed 24/09/2025

  View tender →

• Epoxy compound for general purpose.ts as undertype =two component consisting resin & hardner.mixing ratio =resin & hardner 1:1 vol.viscosity of resin =putty consistency. viscosity of hardner =putty consistency. mixing time =2-3 minutes.physical state of mixed mass =fine smooth putty consistency. curing time =30/40 minutes at 30 degree c. hardness =70-80 shores d .water absorption =28 mgs.(after 24 hrs water immersion) dielectric strength =13-14 kv/mm. compressive strength =450-500 kg/cm sq. t

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Mumbai CST Closed 15/10/2024

  View tender →

• General purpose epoxy based sealing compound in putty forms consisting of (i) resin (ii) hardener as per is: 12994-1990 having mixing ratio 1:1 and setting time 4 to 6 hrs. this is shelf life item. (shelf life of this item is 12 months).

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 31/01/2025

  View tender →

• Procurement of anabond - 669r (rtv silicon sealant) or similar for electric locos and emus, with the following parameters : i) specific gravity : 0.98-1.05, ii) skin forming time : 2-8 minute (30/- 2 degree c, 55 /- 5 percent rh), iii) elongation >/- 340 percent , iv) hardness : shore a (18-28). shelf life : 12-18 months.

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 16/01/2025

  View tender →

• Supply, installation, commissioning of 10mm 30 degree hd telescope wl330mm sapphire tip for scratch resistance, laser wielded joints, high transmission ratio for uniform brightness, medical grade stainless steel tube and body, fully autoclave.

  Government of West Bengal · Dum Dum Municipal Office Closed 07/11/2023

  View tender →

• General purpose epoxy based sealing compound in putty forms consisting of (i) resin (ii) hardner as per is : 8230 having mixing ratio 1:1 and setting time 4 to 6 hrs.(shelf life of this item is 12 months)

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · Kolkata Closed 19/04/2024

  View tender →

• Tachometer contact type and non contact type range optical (non-contact) measurement: 1 to 99999 revolutions/minute contact measurement: 10 to 19999 revolutions/minute precision plus or minus 0.02 percentage rd1 sensing distance (optical) 500 mm operating temperature 0 degree c to 50 degree c battery type (2) 1.5v lr6 (alkaline) aa battery, battery life : about 40 hours warranty period 1 year weight appx 250gm. model no fluke 931 or similar. attachments * 0.1 m wheel * conical speed measuring

  For complete deion and other details, please refer to tender

  Ministry of Railways | Central Govt. Ministry/Department · New Delhi Closed 26/02/2024

  View tender →