Hex head bolt m24x90mm. to is:1364,s 8.8 split pin hole & castle nut to is:2232-67 spring washe

M10x90 bolt with castle nut, split pin and washer

Cd/zn plated high tensile hex head screw with nut size m10x60 mm long, 1.5mm pitch grade 8.8/9.8 to is 1364/part2/2002 with two plain washer to is:2016 & one spring washer to is:3063 for demu.

Screw hex head m 10 x 45 mm to is:1364, s 8.8, with one nut to is: 1364 property class 8, two nos. flat washer to is: 2016 and one spring washer to din 127b is: 3063 for fixation of cable cleat of tm (restricted to be procured from clw approved sources).

1. ht hh screw with nut m6x50 to is 1364/part 2 &3/2002, grade 8.8/10.9 for screw and grade 8 for nut with 2 flat washer to is: 2016 and 1 spring washer to is:3063 used for fitment of headlight. item should be supplied in assemble condition. 2. ht hh screw with nut m5x30 to is 1364/part 2 &3/2002, grade 8.8/10.9 for screw and grade 8 for nut with 2 flat washer to is: 2016 & 1 spring washer to is: 3063 used for fitment of cab items. item should be supplied in assemble condition.

Hexagonal bolt (m10 x 90 long) with cast [hexagonal bolt (m10 x 90 long) with castle nut, split pin and washer for master valve arrangement of discharge system in btpn wagons

Set of hardware items as per icf drg. no. emu/m-3-2-070, alt. c [01 set consist of 05 items] which are as follows : [1] hex. head screw, is:1364(part-2)/iso:4017-m8x65-8.8 (item no.2) -- 1 nos./set [2] hexagon nut-is 1364(part 3)/iso 4032-m8-8 (item no.3) -- 1 nos./set [3] spring lock washer b8 is 3063 (item no.4) -- 1 nos./set [4] split pin iso 1234-2.5x20-st (item no.5) -- 1 nos./set [5] plain washer od25/id9x2 (item no.6) -- 2 nos./set.

Sealing ring,distance ring,key,impeller nut,rubber bearing,lock washer,o-ring,o-ring,o-ring,bearing spider,int shaft sleeve,rubber bearing,screwed coupling,o-ring,o-ring,head shaft,clamping plate,split gland,liqud deflector,shaft sleeve,distance sleeve,key,key,key,shaft sleeve nut,bearing nut,thrust collar,o-ring,o-ring,enclosed impeller,screwed coupling

Set of sand pipe bracket assembly of wag7 locos consisting of - (1) sand pipe bracket to clw s drg. no.- 06/3/21/98 (alt.-4) = 2 nos. (2) sand pipe bracket to clw s drg.no.- 06/3/21/8a (alt.-4) = 2 nos. (3) sand pipe clip to clw s drg. no.- 06/4/21/7 (alt.-2) (ref.- 1) = 8 nos. (4) hex. head screw m10 x 35 mm 10.4 to 8 nos. (5) hex. head nut m10 to is:1364 = 8 nos. (6) spring washer m15 to is:3063 = 16 nos. (7) end piece to clw s drg. no. 05/4/21 /14 (alt.-0) = 4 nos.

Kit for dome fittings consisting of 03 items 1] hex. bolt m - 10 x 90 with castle nut, split pin and washer to rdso drg. no. wd-86081-s-65, alt. 15, item no. - 18, qty. - 20 nos. 2] special bolt for 100 mm lubricated taper plug valve to rdso drg. no. wd-93066-s-10, alt. 1, qty.-15 nos. 3] lubricating screw for 100mm lubricated taper plug valve to rdso drg. no. wd-93066-s-11, alt. 1, qty.-25 nos. material and specification for sr. no. 1 should be as per drawing. material and specification