Changing of upper and lower (both side) damaged radius arm eye housing and new bushing fitting and welding of broken mounting eye and repairing of output shaft of dumper assembly opening, drive line opening and dumper assembly dismantling of 10327

Repairing of 02 damaged geared coupling (male-female) for both gear box side and generator side (coupling connected the gear box shaft and the generator shaft) of 1.2 mw capacity horizontal hydro machine no. 01 and 02 damaged gear coupling (m

Surface dressing of both banks, side slopes, berms etc.by mechanical means/deploying sufficient&amp#x0d labour and including disposal of rubbish, msw and c and d waste within the area by excavation of pits&amp#x0d of required size and levelling after disposal

Construction of 02 nos of new 33 kv bay with bus extension on both side and required material for the restoration of existing 33 kv bay as well as replacement of existing single bus bar with double moose main bus bar at gss deoghar on turnkey basis

Labour engaged for white washing on stones in fixing of stones both side of road and cleaning of main kaccha path and causeways etc. and maintenance of tracks in ghatiwala and laatwala in lower and upper nepli beat, nepli block, nepli range

Estimate for replacement of 02 no. joint kit (300 sqmm cable) and 70 meter cable 33 kv kesla feeder location dhanybad choraha tawanagar road, 33 kv kesla feeder and kit both side of under ground near 33/11 kv substation under kesla d/c onm itarsi

The handloom parivattam should be made of 100 cotton and 60s x 60s cotton and the size of the parivattam should be of 1.83 m length and 0.90m width read x pick 132x 100, 60s vip on each end of parivattam in the length side arulmigu dhandayuthap

Complete repairing / overhauling of both side (lhs and rhs), 02 nos. propel gearbox assembly (part no. 4106002575) with providing of spares of be-195, 10 m3 rope shovel working at bina project.

Repairing of 02 nos. steering cylinder lhs and rhs, tie rod assy., rear drive line, front side both suspension and dala canopy and tyre rim of dumpers sl. no.60397.

Flat type heavy duty bi-metallic clamp made of brass and aluminum it should have brass pad 50x50x10 mm with16 mm hole at center and aluminum on other side size 175x70x10 mm. having 12 nos. g.i. nut and bolt size7/15x5 mm with plain and spring washe