24 volt starter battery charger for 500 kva da set as per rcf specification no. edts -106, rev. nil, am -1 & 2, corr.-1 .

Housing for earthing brush assembly (for lhb type coaches) as per rcf drg. no. lw71233, alt. c, item no. 1 & 2.conforming to rcf specification no. edts-101, rev. c, amendment 1, corr-6, annexure-1.

Double inlet centrifugal blower assembly complete (type-i) with mounting brackets, 415v, 3phase, 50hz, 1500 rpm, air delivery 625 cmh as per rcf drawing no. lw75205, alt. a conforming to rcf specification no. edts-331, rev-nil; corr-1,2 & 3; amdt.1

Copper crimping socket for 25 sq mm cablcopper crimping socket for 25 sq mm cable (stud size m10) to rcf spec no. edts - 200 rev.-nil. amd-2 corr.- 3 table -1 item no. 13

Copper tubular crimping sockets for e-beam cables of size 150 sq. mm, stud size m16, as per item no. 1 of rcf specification: edts-200 rev-nil, am-2, corr. no. 1, 2 & 3.

24v starter battery charger for 500 kva dg set of eog power car conforming to rcf spec. no. edts - 106 (rev-0) am-1,2 & corr-1 / latest input voltage: 230 +/- 5 volts ac, output voltage: 27 volts dc, current rating: 50amps.

Maintenance kit-03 for earthing equipment kit conforming to rcf spec. no. edts-101 rev. c, amend.2 corr. 07, annexure 1. one set consist of 06 items- (1) s.s. bush to rcf drawing no. lw71235, alt. a =02 nos. (2) brush holder housing to rcf drawingno. lw71238, alt. nil =01 no. (3) carbon brush assembly to rcf drawing no. lw71239, alt.nil =02 nos. (4) clip assembly to rcf drawing no. lw71240, alt. a=02 nos. (5) isolating bush to rcf drawing no. lw71244, alt. a =02 nos. (6) bracket to rcf drawing

Kitchen chimney 230v ac, 50hz as per following technical details: (1) suction : 700 m3/hrs. (2 nos. motors), (2) width: 60 cm, (3) filter : baffle, (4) lights : 2 nos. lamp (5) control: electromechanical/feather, tough (6) design : wall mounted. (7) stainless steel. make:faber/kafe/glen/cata only, as per rcf spec. edts-118, rev.- e . with am. 1 & 2, corr-1, 2 , 3

Refrigerator, frost free, double door, 310 litres capacity, 230 v ac, 50 hz, stabilizer free operation (100-300 v)ac, digital inverter compressor, toughened glass shelves, 2 star rating or more, with dimensions width-60cm,depth-70cm,height-166cm (tolerances :minus-2cm), suitable for fitment in lhb hot buffet cars conforming to rcf specification no. edts-118 (latest revision/amendment), positive tolerances in dimensions not accepted and complete with all standard accessories.makes: m/s.samsung,

8mm t wrench prop nut wrench,1 point 5mm t allen key,2mm t allen key,2 point 5mm t allen key,3mm t allen key,wire cutter or flush cutter,wire stripper,soldering station temperature controlled,soldering lead or solder wire,soldering flux,tweezers precision or esd set,digital microscope for solder joint inspection,motor thrust meter or test stand,hot air rework station,heat shrink tubing set assorted sizes,heat gun,propeller balancer,lipo or li-ion safe charging bag,battery voltage checker or low voltage alarm,precision screwdriver set phillips or flathead torx hex,digital vernier caliper,cable ties zip ties,esd anti static mat and wrist strap,servo tester esc programming card,tool storage box organizer,fire-resistant lipo storage bag box,smoke absorber,esd gloves,dremmel set,drill machine with drill bits set,ipa,glue gun and glue sticks,silicone glue loctite and misc glue items,straps 40cm 8pcs set,drone bags,screw driver set