Reducing nipple of size 1/2 x 3/8 bsp threading (parallel) on both sides, total length - 40mm; 1/2 threaded length -15 mm; 3/8 threaded length-15mm, hex. head thickness-10mm, width af27mm, 3/8 ends inside should have tapered profile (cone type). material: carbon steel astm-a108 & grade a1018 with zinc coated. note: material should be machined from forged planks & not to be casted.

Annuloplasty ringmade of teflon or dacron for use in mitral valve /tricuspid valve repair.should be rigid/semi rigid. size:26/27, suitability as per iso or bis or fda or ce or cdsco approval, annuloplasty ringmade of teflon or dacron for use in mitral valve /tricuspid valve repair.should be rigid/semi rigid.size:28/29mm , suitability as per iso or bis or fda or ce or cdsco approval, annuloplasty ring made of teflon or dacron for use in mitral valve / tricuspid valve repair.should be rigid/semi

Hermitically sealed scroll compressor, suitable for r-407 c refrigerant gas, working on 415 vac, 50 hz, conforming to rdso specification no. rdso/pe/spec/ac/0061/2005(rev-1). make and model should be rdso approved. note: (i) emerson part no. zr 61 kce tfd522 / danfoss part no. mlz038t4 or any other make and model of equipment/component can only be considered with prior approval of rdso.

Purg o mate automatic float air vent valve shut off valve having thread bsp-3/8 inch, 10 bar, 110 degree centigrade and hexagonal ss reducer size-3/4 inch x 3/8 inch to rcf drg. no.- lw63150 alt. e item no. 4 & 7.matl. & specn. as per drg note:- make of the item should be as per drawing and advance sample approval is required as it is mentioned in drawing.

Rechargeable led mining helmet with high capacity lithium ion battery. dual beam adjustment with primary beam 20 degree narrow and secondary 120 degree wide distance covered 1000 mtrs & electronic charger ges2020 (govt. lab tested). specification of mining helmet is2925:1984, cm/l-7572484 isi marked complying with is 2925-1984 with gov of india approval no. sa/06/2013 along with mounted rechargeable smd cree led of 15 watt min. head lamp should be the part of helmet. lenzs for led lamp is poly

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender

For complete deion and other details, please refer to tender