Conducting structural stability by charted civil structural engineer obtaining certificate of structural stability for 2x80 mw phps mppgcl totladoh

Procurement of slurry spray nozzles for fgd mech maint at vstps.

Preparation of dpr including detailed layout, design and drawing of infrastructure services for new industrial township in rahpura jagir, bareilly

Layout and excavation work,earth filling and hard cementing work,vertical pole support as required for structure,ms trusses support as required for structure,ms purlins or rafters supports as required for structure,wall cladding,tin roofing,doors 7x 3 feet,window 4x4 feet,enamel paint of ms structure,electrical work as required,ceramic tiling work

Fabrication of bruchid trap,foldable net structure,vertical drilling machine,temperature regulated anaerobic reactor,drawing device-camera lucida,tractor front mounted loader small

Four-legged chain sling top round ring of dia 50 mm x id 200mm, bottom eye hooks, chain dia 16mm, effective length of sling 2.5 meters, s.w.l. of sling 16.0 tons at 90 degree angle (as per drawing no j&t-4704) with load test certificate from govt. approved testing house

60 percent methane gas calibration mixture wit [60 percent methane gas calibration mixture with following features 1. gas composition: 60 percent methane balanced with nitrogen 2. canister specifications: compact 0.5 litre water capacity portable aluminum/steel canister. 3. hardware accessories: equipped with an integrated flow control needle valve and an analog pressure gauge for precision gas drawing. 4. filling pressure: rated at 20 kg/cm?. 5. stability & shelf life: certified gas stab

10-size 4-way valve housing for ps10-40 10-size 4-way valve housing for ps10-40 sequence valve (pressure control valve) for 140t crane as per drawing no. jt/sk-3535. material: ss 304 note: 1. material test certificate from nabl approved lab should be submitted along with the supply material. 2. firm should submit gc/tc along with the supply material.

Tooth spacing k value checking go & no g [tooth spacing k value checking go & no go gauge for bull gear- 107 teeth (mating shaft pinion -21 teeth ) for wag-9 locomotive. size go: 317.09/317.17 mm & no go (service limit): 316.49 mm. ref : rdso drawing no. sk.dp-3848. material: tool steel- is-3748/90, hardness: 40/45 hrc and supply with calibration certificate issued from nabl approved lab.]

Supply of structure bonds (other than platform) fabricated from ms flat steel of size 40x6 mm with smooth edges, length 3.5 metres and above, complete with gi nuts, bolts and washers of size 16x50x38 mm, duly painted with one coat of red oxide primer and finished with black paint, as per rdso drawing no. eti/ohe/p/7000 mod-f or latest