Purchase of 60,000 mts. of s grade types of sugar i.e., s1, s2, s30, s31, s1 30 and s2 30 as per specification

Supply, installation and commissioning of automated and computerized test bench for automatic pressure modification device and lsd as per attached specification.

S1 hydraulic press 10 ton capacity of good quality and branded,s2 diagnostic tool kit with laptop and software of bs iv and bs vi for vehicles of good quality and branded,s3 diagnostic tool kit with laptop and software of bs iv and bs vi for equipment of good quality and branded,s4 hydraulic car lift two post lift 4 ton capacity of good quality and branded,s5 brazzing torch,s6 gas cylinder key for oxygen and accetelyne gas cylinder,s7 empty plastic barrels 210 ltrs capacity,s8 inspection report e 03 as per sample pad of 100 sheets,s9 inspection report e 23 as per sample pad of 100 sheets,s10 job card pad of 100 pages as per sample,s11 battery cable heavy duty red colour 1394 oblique 0 point 4 mm 1 point 40 mm insulation as per is 2465 1984,s12 battery cable heavy duty black colour 1394 oblique 0 point 4 mm 1 point 40 mm insulation as per is 2465 1984,s13 ms angle 25 mm x 25 mm x 4 mm,s14 ms angle 40 mm x 40 mm x 5 mm,s15 ms angle 50 mm x 50 mm x 5 mm,s16 packing paper 22 inch x 32 inch x 1 oblique 32 inch bro

Grp repair kit,air less spray painting machine, part no. 5 by 8 hp motor,lp air compressor with hose reel 30 mtrs, part no. 15 bar pressure,12 ft bed lathe, 220v, 3 jaw chuck, foot brake, coolant system,wood turning lathe machine,electric oven 1000w, part no. 230v ac, 50 hz,automatic winding machine,auto transformer,hydraulic power pipe bending machine, part no. thickness 2.5 mm-8

Spares of automatic pressure modification (amp) device (el-60) for bmbs wagon consisting of 23 items as per attached annexure a . material and specification : as per drawing no. wd-08096-s-1 alt.2 & conforming to rdso s spec. no. wd-23 bmbs-2008 (rev.1), amend. no. 1 of sept-2016.

Spares of automatic pressure modification (amp) device (el-60) for bmbs wagon consisting of 23 items as per attached annexure a . material and specification : as per drawing no. wd-08096-s-1 alt.2 & conforming to rdso s spec. no. wd-23 bmbs-2008 (rev.1), amend. no. 1 of sept-2016.

S1 ms shuttering plate 1 point 20 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s2 ms shuttering plate 1 mtr x 1 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s3 ms shuttering plate 1 mtr x 0 point 60 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s4 ms shuttering plate 1 mtr x 0 point 50 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s5 ms shuttering plate 1 mtr x 0 point 30 mtr made with 3 point 15 mm thick ms sheet supported with angle iron 50x50x6mm having properly welded comma uniform finish,s6 shuttering nut and bolt of size m12 x 50mm comma m12 x 60mm of good quality and branded,s7 round ms pipe 50mm dia x 6 mtr long x 3 point 5 mm thickness of good quality and branded,s8 round ms pipe 50mm dia

Sheets 8 ft,aprool setting plywood,wood 12 mm x 4 mm,flooring with plastic flooring,nylon rope 8 and 10 mm,geysers 25 l,mcb 16 amp,changeover 63 amp,electric cloth dryer machine,gas stove bhatti small single burne,mixer grinder heavy duty,masala trolley,deep freezers,insulated food carriers,plastic dining tables,beverage dispenser 5 ltr,tapemaster,water pump motorised 10 hp,hdpe pipe 32 mm,high pressure pipe 10 mm superior quality,syntank 500 ltr,barrel 200 ltr