Floor end profile,l=2000mm, as per drawing: lw41112, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation.the item should be packed with adequate strength.

Filter media paper kit consisting of item no.4 & item no.6 to rdso drg.skdp 3948, alt.nil and conforming to rdso spec,no.mp.0.2600.26, rev 01,dec,2021. each kit consisting of two primary stage & two secondary stage to pleated filter media part no.hb-pi kit & hb-po kit of m/s.parker,usa ( or ) filter media pleated pack kit pt.no.369739 of m/s.parker hannifin india pvt.ltd, bangalore (or) filter paper media grade sk5085cw of m/s ahlstrom korea co. ltd.,korea. note: filter paper kits should be c

Trochanteric femur nail advanced system one set. spec: (1) 9 mm to 12 mm diameter with inbuilt set screw. (2) should be capable of allowing cannulated screw or blade (one) with same hole in proximal part. (3) end of blade and screw should be porous to allow augmentation with 5 mm distal locking option (two). (4) material should be titanium molybdenum. (complete range of size shape and side specific implant with instrumentation should be available at the time of surgery).[ item code no.:s6155

Needle for inside-out meniscal repair with eye for thread.1. standard-length stainless steel with a 38cm or more in length and diameter should be 0.8 mm or less. 2. should be made up of high strength, flexible stainless steel, 3. needle should have eye on non-sharp end to pass minimum 2-0 suture. 4. needles can be used with other meniscal repair systems. (as per detailed specifications attached)

Hose connection 3/8 x 1600 mm long to icf drg no icf/sk-3-5-517,alt-u/18 item no 2 .both end should be swivel end with three nylon washers to icf drg no icf/sk-3-5-263, alt-nil, item no 3.

Lub oil filter, for t-28 machines. ameca [lub oil filter, for t-28 machines. ameca [colmar] part no. 9990187, donaldson part no.: p553315, vm motori part no.: 41150030a, make- ameca[colmar]/ donaldson/ vm motori/ parker, note: material supplied by firm should be fitted on machine without any modifications, ]

Filter assembly for oil cooler ventilation as per clw specification no. clw/ms/3/012, alt.- 6 or latest and clw drawing no. 1209.11.135-123, alt-3 or latest for 3-phase locos. item should be procured from clw approved sources.

Set of end shields(de & nde) with grease [set of end shields(de & nde) with grease cups suitable to 6312/c3 bearings for m/s. i.c. electricals make oil cooling blower type ic 301m tesc, 30kw/40hp, 50hz, 415v as follows. 1) de side end shield with grease cups. qty/set. = 01 no. 2) nde side end shield with grease cups. qty/set. = 01 no. note: one sample set should be got approved before effecting bulk supply.]

Ms channel of size 150x75x6 [430 mm long] along with ms plate of size 150x75x16mm i.e. ms plate [ref: 2] to be welded to the channel [ref: 1] at one end as per s. c. rly.drg. no.c/els/lgd/ex.ftg/3/12, alt 1 ref.no.1 & 2. note:- after welding the channels should be coated with black enamel paint as per is:8662/2004

Pipe water g. i. 1/2” medium quality conforming to is: 1239 (part-i) (weight should be 1.22 kg per met,pipe water g. i. 3/4” medium quality conforming to is: 1239 (part-i) (weight should be 1.58 kg per met,pipe g. i. 1 inch (25 mm) medium quality conforming to is: 1239 (part-i) screwed at both ends, pipe th,g. i. pipe 40mm dia medium weight, screwed at both end socket at one end and other end protected with,pipe g. i. size 2” medium quality confirming to is: 1239 (part-i) 1980, threaded at both end socketed,a set of 1/2” gi fittings consist of nipple 1/2” x4” -75 nos. , socket-50 nos, elbow-50 nos. , union-50,a set of 3/4 gi fittings consist of socket-50 nos, . elbow-50 nos. , nipple 3/4” x4” -75 nos. , union–,a set of 1” gi fittings consist of socket-75 nos, . elbow-75 nos. , nipple 1” x4” -75 nos. , union– 50