Hex. head screw (full threaded) m14 x 120 x 2p zinc plated (property class - 8.8) to is 1364 : part-2 : 2023.

Hexazon head bolt size m30 x 160 property class 8.8 zinc plated as per is 1364/2002 for tm support plate.

Set of hardware for three phase loco as [set of hardware for three phase loco as per is 1364 (part 1) iso 4014 consists of (1) m 24x120 mm, property class 8.8 for cbc foundation = 12 nos., (2) m 24x90/54 mm, property class 8.8 for cbc rest plate = 12 nos., (3) m 24x70/54 mm, property class 8.8 for draft gear rest plate & hood = 24 nos., (4) m 27x180 mm thread length 115 mm, property class 8.8 for side buffers = 16 nos., (5) m 20x80 mm, property class 8.8 for damper foundation = 8 nos., (6) m 1

Ht hex head bolt [zinc plated] of size: m12 x 35, is: 1367, gr: 8.8. used for wag9 locos. make: tvs/unbrako/dfl/equivalent.

Ht hex head bolt of size m16x35mm, full thread length x2.0mm pitch, pc 8.8, as per is: 1364/1367with zinc coating. hsn code is 7318 make: sec or tvs or vif or dfl or unbrako or its equivalent.

Prevailing torque type hexagon thin nut with non-metallic insert (nylon) of size m16 with fine thread pitch 1.5, property class 6, grade a, as per din 985. makes - unbrako or tvs or tuff or dfl.

Set of consumables consisting of followi [set of consumables consisting of following materials: 1. bolt hex head: m12 ? 1.75 ? 50 mm, grade 8.8, qty/set-01 no, 2. nut: m12?1.75 mm, qty/set-01 no, 3. flat washer: 12mm. id-13 mm od-20mm thickness:2mm, qty/set - 01 no, 4. spring lock washer:12 mm,id:12.2-12.6mm,od:21.1mm,thickness:2.5mm, qty/set-01 no. make:- tvs/unbraco/lps/dfl only. ]

Set of hardware items for secondary suspension of 3 phase locos consisting of 07 items with zinc coating as follows. (1) socket head screw m12 x 25mm as per is:6761/1994 & 12.9 pc, qty/ set- 04 nos, (2) hex head screw m12 x 20mm as per is:1364/1367 & 8.8 pc qty/set-04 nos, (3) hex h ead bolt m16 x 20mm as per is:1364/1367 & 8.8 pc-qty/set-04 nos, (4) hex head bolt m20 x 60mm as per is:1364/1367 & 8.8 pc percent u2013 qty/set -08 nos, (5) hex head bolt m20 x 80mm as per is:1364/ 1367 & 8.8 pc-

Hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles

Screw hex head m 10 x 45 mm to is:1364, s 8.8, with one nut to is: 1364 property class 8, two nos. flat washer to is: 2016 and one spring washer to din 127b is: 3063 for fixation of cable cleat of tm (restricted to be procured from clw approved sources).