Chlorine tablets for use in ir-drdo bio-toilets confirming to rcf specification mdts-14274 rev-00. technical requirements: 1. the tablet size should be 78 mm diameter and weight should be of approximately 200 g. 2. the tablet should have active molecule of 3, 5 di-chloro-isocyanuric-acid. 3. it should have effective chlorine of >= 50 percent chlorine. 4. the tablet should have formulated for sustained release (should last for at least 21 days in tap water). 5. moisture content should be

Pacer with mask for child [srphc82337065-spacer with mask for children.1)it should be suitable for use for infants and children.2)the minimum capacity of the holding chamber should be approximately 250cc(ml).3)the holding chamber should have a valve to prevent rebreathing of the exhaled air.4)should be made of polymer /polycarbonated material.5)should have a mask of pediatric size suitable for covering the nose and mouth of the infant and children.6)should be compatible with the mdi which is b

One piece femoral adult arterial cannula. 1) it should have a micro-port tips, made of a one piece material and kink resistant 2) cannula length 17 inche(43.2 cm) overall length with 7.1 in(18 cm) tip it should offer a high flow rate with minimal pressure differntial. 3) cannula should have a introducer along with depth markings to precise the position of the cannulae.should be vented 3/8 in(0.95 cm) connector. size 19 fr biomedicus. cat no.96570 - 019.

Prosthetic components (artificial limbs). standard below knee prosthesis with carbon fibre laminated outer and prosthetic components (artificial limbs). standard below knee prosthesis with carbon fibre laminated outer and inner flexible double wall socket, carbon fibre waterproof high active (k3) foot, silicon gel liner, socket lock, socket adaptor, below knee foam and cosmetic stocking for finishing.the supplying firm should mandatorily have a gait training centre of their own in the city of

Va fibula plate (1 plate + 8 va locking screws + 6 cortical screws). spec: locking anatomical five hole variable angle distal fibula plate with 8(2.7 mm) va screw for head and shaft with two 3.5 cortical screw option in head for syndesmotic layer and 4(2.7mm) cortical screw, variable angle locking screw should have option to lock at + - 15 degree of axis in any direction complete range of size shape and side specific implant with instrumentation at the time of surgery. implant should be us fda

Reducing nipple of size 1/2 x 3/8 bsp threading (parallel) on both sides, total length - 40mm; 1/2 threaded length -15 mm; 3/8 threaded length-15mm, hex. head thickness-10mm, width af27mm, 3/8 ends inside should have tapered profile (cone type). material: carbon steel astm-a108 & grade a1018 with zinc coated. note: material should be machined from forged planks & not to be casted.

Humerus multilock nail set [srphc82414005-humerus multilock nail set should consist of reamed humerus nail with 4.5mm multilock blunt screws and 2 locking scrws. it should be available in diameter of 7,8,8.5,9.5mm with length ranging from 160 -300mm. itshould have polyethylene inlay with options of 3.5 and 4mm locking screws with complete set of instrumentation. unit:set]

Intubating catheter/bougie 14 french 70 cm long - (1) it should facilitate endotracheal intubation in patients when visualisation of the glottis is inadequate. (2). introducer should be a 14 french 70 cm long radio opaque catheter for adults (3). the tip should be blunt and angled to assist in proper placement beyond the vocal cords and to minimise trauma to internal structures. (4). should have 2 removable adapters to permit ventilation. one with a 15mm adapter to connect to ventilating circu

Standard above knee prosthesis with carbon fibre laminated outer and inner flexible double wall socket, carbon fibre waterproof high active (k3) foot, polycentric pneumatic cylinder knee joint with, tes belt, silicon gel liner, socket lock, above knee foam and cosmetic stocking for finishing.the firm supplying the item should mandatorily have their own gait training centre in proper kolkata.[ item code no.:s61699 , ai/2026-27 ]

3 kvar metalized polypropylene gas filled, wavy cut three phase self-healing type capacitors, rated at 480v, 50hz, rated current 3.6 amps. capacitor should have discharge resistor and over pressure disconnection as per rdso modification sheet no. rdso/pe/ms/ac/0054-2011 (rev-1)/latest and confirming to is: 13340 (part-1): 2012 / iec 60831-1:2002/latest with isi mark suitable for capacitor bank of lhb ac coach. acceptable makes: m/s epcos or m/s vishay or any other equivalent capacitor confirm