Tender Details
About Tender
🚂 Procurement Opportunity For G.P. Rubber Based Adhesive 🛠️ The Ministry Of Railways, Under The Central Government, Invites Tenders For The Supply Of G.P. Rubber Based Adhesive. The Specified Product Must Adhere To The Following Specifications: 🔹 Appearance: Dark Brown Liquid 🔹 Solid Contents: 23% 🔹 Viscosity At 30°C: 20 25 Poise 🔹 Coverage Per Sq. M: 250 350 Sq. M 🔹 Weight/Liter: 0.9/ 0.5 Kg 🔹 Operating Temp: 20 To 80°C 🔹 Tensile Strength: 0.95 Kg/Cm² 🔹 Peel Strength: 0.80 Kg/Cm 📅 Tender Submission Deadline: April 23, 2024, 2:25 Pm Interested Bidders Should Submit Detailed Bids, Including Compliance With The Above Specifications, Pricing, And Delivery Timelines. Tender Documents Can Be Obtained From The Specified Location, And No Tender Fee Or Earnest Money Deposit (Emd) Is Required. Keywords: G.P. Rubber Based Adhesive, Pidilite Sr998, Dunlop S 758, Ministry Of Railways, Tender, Procurement, Central Government, Jaipur| Particulars | Details |
|---|---|
| Title |
G.P. Rubber Based Adhesive, Pidilite Sr998 Or Dunlop S 758 Or Equivalent In 5 Liters Pack, With Specn.(1) Appearance Dark Brown Liquid, (2) Solid Contents 23 Percentage, (3) Viscosity At 30 Degree C 20 25 Poise, (4) Coverage Per Sq. M 250 350 Sq. M, (5) Weight/Liter 0.9/ 0.5 Kg. , (6) Operating Temp 20 To 80 Degree C. , (7) Tensile Strength 0.95 Kg/Cm Sq. , (8) Peel Strength 0.80 Kg/Cm Width.
|
| Description |
For Complete Deion And Other Details, Please Refer To Tender
|
| Organisation | Ministry of Railways | Central Govt. Ministry/Department |
| Tender Id | 106321003 |
|
Reference Number |
42245234 |
| Tender Fee | 0 |
| EMD | 0 |
| Tender Value | |
| Place | Jaipur |
| Link | https://www.ireps.gov.in/ireps/supply/pdfdocs/042024/106321003/viewNitPdf_4541985.pdf |
| Start Date | April 18, 2024 00:12 |
| End Date |
23/04/2024 ( Expired 384 days ago ) Search Similar tenders? |
|
Join for More Relevant Opportunities |
Similar Tenders
Rubber paste solution similar to fevicol sr 998 packed in 1 ltr. container , specification : specific gravity - 0.85 to 0.90 , viscosity - 20 p to 25 p , peel strength - minimum 2 kg/inch . make : dendrite or fevicol sr 998 or dunlop s- 578 or superbond 5x only . note :- shelf life of material should be minimum 12 months during delivery
For complete deion and other details, please refer to tender
Read moreG. p. rubber based adhesive, pedelite sr998 or dunlop s-758 or equivalent in 5 liters pack, with specn. 1) appearance - dark brown liquid.2) solid contents - 23 percent . 3) viscosity at 30 c - 20-25 poise.4) coverage per sq.m. - 250-350 sq.m. 5) weight/litre - 0.9 -0.5kg.6) operating temp -20 c to 80 c. 7) tensile strength -0.95 kg/cm sq.8) peel strength - 0.80 kg/cm width.
For complete deion and other details, please refer to tender
Read moreSilicon based grease for lubrication of rubber component in distributer valve (pneumatic valve) in 1 kg of package of m/s dow corning india ltd brand molykote-55 o-ring grease or m/s asv multichemie pvt ltd 655 silicon grease or equivalent some of parameters are as under: (1) composition silicne oil, ester and lithium soap. (2) density: 0.95 to 0.98 g/cm3. (3) nlgi consistency class approx.2. (4) temperature: (a) service temperature - 65 to 175 degree c. (b) drop point: 215 to 220 dgree c. (5
For complete deion and other details, please refer to tender
Read moreAnerobic adhesive sealent type anr-138 of pidilite or equivalent to use on mp & ip fixing bolts of traction motor and to the following parameters. 1) viscosity-2000-2500 cps 2)static shear strength-250-300 kgs/cm 3)breakaway torque 250-450 kgs/cm. 4) prevailing torque 150-200 kgs/cm. 5)gap filling - 0.25 mm. 6) setting time 10-20 minutes. 7) temp. resistance (-)60 degrees c to ()180 degrees c. capacity- each 50 ml tube bottle.
For complete deion and other details, please refer to tender
Read moreAnaerobic adhesive sealant in a plastic container of 50 ml tube bottle type: anr-138 of m/s. pidilite/mumbai or equivalent to use on mp & ip fixing bolts of traction motor and to the following parameters. 1.viscosity 2000 - 2500 cps. 2.static shear strength 250 - 300 kgs/cm 3.breakaway torque 250 - 450 kgs-cm.4.prevailing torque 150 - 200 kgs-cm 5.gap filling 0.25mm. 6.setting time 10 -20 minutes. 7.temp. resistance (-) 60 degree c to () 180 degree c
For complete deion and other details, please refer to tender
Read moreEpoxy compound for general purpose.ts as undertype =two component consisting resin & hardner.mixing ratio =resin & hardner 1:1 vol.viscosity of resin =putty consistency. viscosity of hardner =putty consistency. mixing time =2-3 minutes.physical state of mixed mass =fine smooth putty consistency. curing time =30/40 minutes at 30 degree c. hardness =70-80 shores d .water absorption =28 mgs.(after 24 hrs water immersion) dielectric strength =13-14 kv/mm. compressive strength =450-500 kg/cm sq. t
For complete deion and other details, please refer to tender
Read moreInstant cure adhesive type cyno - 555m of make m/s. anabond or its similar as per specifiation details mentioned below. 1) lap shear strength : 130 - 170kg/cm2. 2) shelf life at 25 degree c : 6months. 3) setting time : 3 - 6seconds. 4) viscosity at 20 degree c : 2 - 10 cps. 5) colour : colourless 6) service temperature : -40 degree c to 80 degree c. 7) resistance to most chemicals, oils & solvents. note: 1) each tube contains minimum quantity of 20 gms. 2) minimum residual shel
For complete deion and other details, please refer to tender
Read moreSilicon based grease for lubrication of rubber component in distributer valve (pneumatic valve) in 1 kg of package of m/s dow corning india ltd brand molykote-55 o-ring grease or m/s asv multichemie pvt ltd 655 silicon grease or equivalent some of parameters are as under: (1) composition silicne oil, ester and lithium soap. (2) density: 0.95 to 0.98 g/cm3. (3) nlgi consistency class approx.2. (4) temperature: (a) service temperature - 65 to 175 degree c. (b) drop point: 215 to 220 dgree c. (5
For complete deion and other details, please refer to tender
Read morePolyamide flexible conduit pipe of size 16mm(nominal dia) of make flucon or its equivalent as per the specifications mentioned below. 1) nominal dia : 16mm, 2) outer dia : 21.2mm (approx.), 3) inner dia : 16.5mm (approx.), 4) bending radium : 40 (approx.), 5) colour : black, 6) material : polyamide-6 type, 7) ip rating : ip 68 with ends properly sealed or in combination with suitable glands, 8) tensile module : 17300 kg(f) sq. cm (approx.), 9) impact strength : 20 kg/ sq. cm (approx.), 10) f
For complete deion and other details, please refer to tender
Read moreAnerobic adhesive sealant in a plastic container of 50 ml tube bottle type: anr-138 of m/s. pidilite/mumbai or equivalent to use on mp & ip fixing bolts of traction motor and to the following parameters. 1) viscosity-2000-2500 cps. 2)static shear strength-250-300 kgs/cm. 3)breakaway torque 250-450 kgs/cm. 4) prevailing torque 150-200kgs/cm. 5)gap filling - 0.25 mm. 6) setting time 10-20 minutes. 7) temp. resistance (-)60degrees c to ()180 degrees c. capacity- each 50 ml tube bottle. (shelf l
For complete deion and other details, please refer to tender
Read more
Click
Here to Download Dockets
of your Industry type
of your Industry type