Supply of d shackles set of one each 1 (25mm), 3/4 (19mm), 5/8 (16mm), 1/2 (12mm) with forged steel gr.80 with galvanized plated . working capacity for 1 , 3/4 should be 3.2 tonne. and working capacity of 5/8 ,1/2 should be 1.6 tonne. type : screw pin make/brand : shri, kepro , cranlin, well worth or similar.

D shackles set of one each 1 (25mm),3/4 (19mm),5/8 (16mm),1/2 (12mm) with forged steel gr.80 with galvanized plated . working capacity for 1 ,3/4 should be 3.2tonne. and working capacity of 5/8 ,1/2 should be 1.6tonne.type :screw pin make/brand : shri, kepro , cranlin, wellworth or similar.

Trestle for lhb coaches to lgds drg.no.c&w.lgd.sk.no.1071, alt-nil. accepted make : pli. the minimum safe working load capacity of each trestles must be 20 tons and the proof load capacity should be 30 tones.

Pacer with mask for child [srphc82337065-spacer with mask for children.1)it should be suitable for use for infants and children.2)the minimum capacity of the holding chamber should be approximately 250cc(ml).3)the holding chamber should have a valve to prevent rebreathing of the exhaled air.4)should be made of polymer /polycarbonated material.5)should have a mask of pediatric size suitable for covering the nose and mouth of the infant and children.6)should be compatible with the mdi which is b

Custom bid for services - bza divn hiring lorries truck good working condition capacity not less than 6 tonne long chasis 4point3m x 2m or above excl cabin for transportation materials bridge repairs ssebrnlr 1 bza 1 iibza 1 rjy1 iirjy 1 total 5 n..

Modified steel wire rope sling of 15 swl [modified steel wire rope sling of 15 swl capacity to drg no. dme/dsl/ed-m-666. note : test certificate to proof load (twice swl) should be furnished from a govt approved test house.]

1) hemoclip rotatable should be a) pre-loaded ready to use b) multiple times reopening capability c) wide jaw span greater than and equal to 16mm d) length 150 to 200cm and 360 degree rotation and 1:1 movement, 2) injection gold probe consists of : a) 7fr injection gold probe combined with sclerotherapy needle and firm catheter shaft b) should have separate irrigation channel, compatible with a 2.8mm working channel c) working length more than 160cm and have a ceramic and gold tip, 3) hemospra

Procurement of lead acid cell, low maintenance, 2 volt in transparent (polypropylene)/hard rubber container conforming to irs:s-88-2004. the cells should be complete with tubular positive plates, pasted negative plates, acid level indicating floats inter-cell connector with bolts & nuts. the cells are required to be dry & uncharged. capacity of each cell will be 400/ah at 10 hrs rate to discharge to 1.85 v per cell at 27 degree centigrade.

Hermitically sealed scroll compressor, suitable for r-407 c refrigerant gas, working on 415 vac, 50 hz, conforming to rdso specification no. rdso/pe/spec/ac/0061/2005(rev-1). make and model should be rdso approved. note: (i) emerson part no. zr 61 kce tfd522 / danfoss part no. mlz038t4 or any other make and model of equipment/component can only be considered with prior approval of rdso.

Evaporator blower wheels (lhs & rhs) with housing, for cab ac of wag7 locomotives. note: 1) item should be suitable for 2t capacity roof mounted cab ac of make daulatram / fedders lylord / sidwal fitted on conventional electric locos to rdso specification no: rdso/2007/el/spec/0055 rev.2 of nov 2007/revised on 07.10.2014. 2) one sample to be got approved before effecting bulk supply.