Selector switch 300 amp, 440 volt ac/dc, 4 pole, 4 way with off position

Supply and installation of 415 volt 1010 kva lt dg set including changeover pannel, cabling arrangement and d.g set shed for 2 nos. lt motor and lt loads at 9 mgd positive suction pump house at wtp palasuni, bbsr

Four pole change over switch disconnector mcb with centre position off(i-o-ii), rated current 40a, operational voltage 415v. makes: legrand / havells / c & s / schneider / abb or its equivalent. note: one sample should be got approved before effecting bulk supply.

Plant selector rotary switch 300a, 250v dc, 4 position,1-pole, 3-way with off suitable for universal mounting for sg ac coaches conforming to rcf spec. no. edts-006, rev.h with corri.-1, 2, 3 & 4.

12w modular box,12w plate,6w modular box,6w plate,4w modular box,4w plate,3w modular box,3w plate,2w modular box,2w plate,blanking plate,20a switch,10a switch,6a switch,20a socket,10a socket,fan regulator,40a 220v dp isolator,40a dp rccb 100ma,16a sp mcb 220v,10a sp mcb 220v,6a sp mcb 220v,1200 mm ceiling fan 5 star,900mm exhaust fan,time switch 24 hours format,9w led lamp,20w led tube light,mk1 230 volt ac starter,24watt down light,15watt down light,1 sqmm copper wire,2w striker led,6w 12w panel

Power selector rotary switch (rsw-i) 500 amps, 250v dc, 3-pole, 4-position, 3-way with off suitable for universal mounting, maximum o.a.l, including handle shall not exceed 400mm conforming to rcf spec. no. edts-006, rev.-h with cor.-1, 2, 3 & 4.

Motor protection circuit breaker (mpcb) for compressor unit and heater unit, current rating 7-10 amp, thermal release range 10-16 amp, class-10, breaking capacity 10ka, 3-pole, voltage rating 415 v ac, conforming to is/iec 60947-2; conforming to rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev. 1); suitable for use in switch board cabinet of lhb type ac coaches. accepted make & cat. /model no.: rdso-approved make and model as per serial no. 39 of rdso letter no. el/7.1.108/mssbc dated 17.09.2

2 core x one and half sq mm pvc insulated copper conductor flexible pvc sheathed cable, 1100 volt,4 sq mm twin core aluminium cable,pvc insulated copper wire thrird fourth square mm , 1 core,copper wire one square mm single core, frlsh, 90mtr in roll,copper wire one and half square mm single core, frlsh, 90mtr in roll,copper wire two and half sq mm single core, frlsh, 90mtr in roll,11kv goab switch vertical type complete with all accessories suitable for 200amps.,11kv triple pole do fuse set,changeover switch 200a. 415v,switch fuse unit with enclosure, rating 200a,single pole mcb of b series 16 a,240 v, 50 hz, 10 ka,240 v, 32amp, singal pole with neutral spn, miniature circuit breaker mcb,240 v, 63amp, singal pole with neutralspn, miniature circuit breaker mcb,mccb 3p 415v 32a,mccb 32 a 4 pole 415 v,mccb 415v 63amp or mccb 63a, 3 pole,four pole mcb 63a, 415v,mccb 100 amp, three pole,mccb, 4 pole, 100a, 415v,mccb 150a,3 pole,mccb 200 amp, three pole,mccb, 4 pole, 200a, 415v,power point combined switch and sock

Pvc insulated single core unsheathed industrial multistrand cables 1 sq mm flame retardant fr conforming to is 694 1990 with bright annealed electrolytic bare copper conductor,porcelain insulating hangers as per approved sample,pvc casing capping 32 mm wide comma not less than 2 mm thick,pvc switch board 7 inch x 4 inch conform to is 14772,pvc switch board 4 inch x 4 inch conform to is 14772,pvc gang box 1 way comma heavy duty,mcb 6 a sp comma 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 6 a dp 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 10 a sp comma 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 10 a dp 240 volt conform to ec 60898 2002 and is 8828 1996,mcb 16 a sp comma 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 16 a dp comma 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 20 a sp comma 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 20 a dp 240 volt conform to iec 60898 2002 and is 8828 1996,mcb 32 a sp conform to iec 60898 2002 and is 8828 1996

Rotary hammer drill 230 v, 50 hz, single phase power rating in watt 800, rotation speed of the hammer (in rpm)-1000, impact rate (ipm)-4300, noise level -99 noise level db. length of 3 pin 5 amp electric cord -5 metres, number of drill 30cm bits provided-4 nos, selector switch for - 36 position drilling/ chiseling. as per specification attached. make only:- bosch, dewalt, tiger, velmoc, msi, stanley, foster, or similar.