Diamond dresser single point, , 3.5 carat, size: - 12.5mm dia x 150 mm long as per annexure,diamond dresser single point, , 4.0 carat, size: - 12.5mm dia x 150 mm long as per annexure

Channel pin single side grooved 7mm dia (for 4mm dia bond wire) as per spec. irs:s-17/75 with latest amendment as per drg. no. s/69/m/irs with latest alteration. spec:

Repairing of five no pressure drum shell dia 215 mm x 1150 mm long shaft dia 75 mm of 1000 mm belt conveyors rvii and rviia seam installed in 3 and 4 incline j p colliery

Galvanised steel chain link fence 125mm x 125mm and 3.15mm dia,laip 2.10mtr long,10 gaze wire,portland cement grade43,coarse sand,20mm stone aggregate,installation of chain link fence

S/f of 20 nos. 7.00 mtr. long pole sp-3 along with 10x2 armoured cable, led fitting, single arm bracket, swithes etc. at different place of ward-75, zone-04, kanpur.

S/f of 10 nos. 7.00 mtr. long pole sp-3 along with 10x2 armoured cable, led fitting, single arm bracket, swithes etc. at different place of ward-75, zone-04, kanpur.

Antique light pole with one diffuser led light with 2.7 mtr long cast iron and ms material with nhpc logo as per given specification.,antique light pole with two diffuser led lights with 3.7 mtr long cast iron and ms material with nhpc logo as per given specification.,4 core x 16 sq mm xlpe insulated pvc sheathed aluminum armored power cable of 1100 v grade,hdpe pipe 45 mm,single pole mcb c-series 6 a 240 v 50 hz 10 ka,freight charges,laying of power cable in ground including excavation and refilling,laying and fixing of hdpe pipe along with power cable,erection of pole structure

Antique light pole with one diffuser led light with 2.7 mtr long cast iron and ms material with nhpc logo as per given specification.,antique light pole with two diffuser led lights with 3.7 mtr long cast iron and ms material with nhpc logo as per given specification.,4 core x 16 sq mm xlpe insulated pvc sheathed aluminum armored power cable of 1100 v grade,hdpe pipe 45 mm,single pole mcb c-series 6 a 240 v 50 hz 10 ka,freight charges,laying of power cable in ground including excavation and refilling,laying and fixing of hdpe pipe along with power cable,erection of pole structure

Plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),plywood for general purposes marked to is 303 (v3),wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4),(vitreous china) - washdown water closets as per is 2556,cp brass waste coupling 40 mm,gi nipple 20 mm x 100 mm,fevicol 1 kg in pack,cast brass float valve 15 mm with ball and rod complete,cast brass valves plunger type 20 mm,ewc single piece vitreous china ware complete,mild steel sliding door bolt cllpt type 300 mm long, rod not less than 16mm dia, isi marked,paint synthetic enamel smoke gray first quality in 04 ltr container,gi tee 25 mm,stainless steel butt hinges size 75 mm,ptmt waste coupling 32 mm,gi socket 15 mm,cp brass extention nipple for 15mm bore 65mm long,cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm,ss plate rack 24 inch x24 inch x10 inch,synthetic enamel paint of black colour.,polish fre

Angle gauge for tool grinding standard,anvil 50 kg - with stand,blow lamp 1 liter capacity,bunsen burners,digital lux meter lcd read out 0.05 to 7000 lumens with battery.,drill angle gauge 45 degree,60 degree,90 degree,dual dc regulated power supply 30-0-30 v, 2 amps,earth copper plate 60cm x 60cm x 3.15 mm,hot wire ammeter 0-15 amps.,lcr meter digital handheld,lead acid battery- 12v 100 ah,lead acid battery- 12v 40 ah,lead acid battery- 12v 75 ah,magnetic flux meter 0-500 tesla,magnifying glass 75 mm with magnifying factor 10x,manual motor coil winding machine,pipe vice cast iron with hardened jaw open type 100 mm,precision angle grinding vice 200 mm,rheostat 0-25 ohms 1 amp,rheostat 0-300 ohms 2 amp,side and face cutter dia 80 x 10 x dia 27 mm,slitting saw cutter dia 75 x 4 x dia 27 mm,soldering and de soldering station,stands with clamps for burette,sterilizer,sun shine recorder,taps and s complete 5, 6, 8, 10 and 12mm of 5,temperature controlled soldering iron 50 watt, 230 volt,temperature gaug